Yes. A wireless system reuses your existing switch boxes and adds hubs, curtain motors and AC controls that talk by radio, so no new cables are run to a central panel. A typical apartment costs AED 20,000–35,000 in the UAE before VAT, and a home in India ₹2.5–15 lakh before GST.
Most people who ask this already live in the home, or are about to move in, and do not want walls and ceilings opened. A wireless system is built for that. A wired system is not: it needs a cable from every point to a central panel, so it is planned before the ceilings are closed.
What a wireless retrofit uses
- Smart switches that go into the wall boxes you already have, in place of your current switches. Most ranges come in two versions: one for boxes with a neutral wire and one for boxes without.
- Relay modules fitted behind an existing switch or next to a load, for things a switch cannot drive directly: water heaters (through a contactor), a garage door or gate motor, irrigation, outdoor lights.
- Curtain and blind motors, added window by window.
- AC control. On fan-coil (FCU) systems, a smart thermostat replaces the one on the wall. On split units, a hub with a built-in infrared blaster controls the AC the way its remote does.
- Smart locks and video doorbells at the entrance.
- A hub that links the devices, and a Wi-Fi network strong enough to reach every room. Where coverage is weak, access points are added.
What has to be checked first
Without rewiring does not mean without checking. These are the points a site visit or a floor plan settles before the price is final:
- Neutral wire at the switch. It decides which switch version fits. Some larger panels and screens need a neutral wire and a deeper wall box than a standard switch.
- The AC unit. A thermostat swap depends on the make and wiring of the AC. If it needs extra wiring or a relay, the installation price changes, so Modo checks the unit before confirming it.
- Heavy loads. A water heater is switched through a contactor rated for it, not by a smart switch on its own.
- Cabling for gates and outdoor lights. Where a relay has to reach an existing gate motor or outdoor circuit, the cable route is confirmed on site.
- Wi-Fi coverage in every room that will have devices.
Wireless retrofit or wired system
| Wireless retrofit | Wired system | |
|---|---|---|
| New cables to a central panel | No | Yes, from every point |
| Walls and ceilings | Left closed; existing switch boxes reused | Planned before ceilings are closed |
| Can start with one room or one system | Yes | No, designed as one system |
| Best fit | A finished apartment or villa | A new build or a full renovation |
What it costs
These are the typical figures from the quotes Modo issued between June and October 2026, before tax and after any discount:
- UAE: one system, such as curtains or the lights in one room, AED 5,000–8,000; an apartment AED 20,000–35,000; a villa AED 25,000–150,000.
- India: a wireless home ₹2.5 lakh to ₹15 lakh.
A wired system costs more because every point is cabled and programmed as one system: a whole villa in the UAE starts from about AED 290,000, and a home in India from about ₹30 lakh. The full breakdowns are in [How much does home automation cost in Dubai?](/guides/home-automation-cost-dubai) and [How much does home automation cost in Bangalore?](/guides/home-automation-cost-bangalore).
How a retrofit goes
1. Send the floor plan, or a list of rooms and what you want to control in each. Where the AC or the switch boxes need checking, Modo visits the site. 2. You get a quote that lists every device and its price room by room, so you can take out what you do not need. 3. The devices are installed room by room, then programmed into scenes and schedules, and handed over with the app set up. 4. Hardware carries the manufacturer's warranty, and Modo's installation workmanship is covered for 12 months from handover.
When rewiring is worth it
If you are already opening walls and ceilings, for a full renovation or a new build, a wired system is the better choice for a large home: one panel, one system, and room for multiroom audio, a home cinema and building systems later. It has to be decided at the design stage, before the ceilings are closed. If you are not opening anything, start wireless; it can begin with one room and grow.
[Tell us about your home](/contact) and we will tell you which fits.
Questions people ask next
Do I need a neutral wire for smart switches?
Not always. Most smart switch ranges come in a version for boxes with a neutral wire and one for boxes without. Some larger touch panels and screens do need a neutral wire and a deeper wall box, which is checked before they are quoted.
Will the installer need to break walls or ceilings?
Not for a wireless system. Switches go into the existing wall boxes, and hubs, motors and thermostats are added without new cables to a central panel.
Can I automate my split AC units without changing them?
Usually yes. A hub with a built-in infrared blaster controls a split unit the way its remote does. On fan-coil (FCU) systems a smart thermostat replaces the wall thermostat, after the AC unit has been checked.
Can I start with one room and add more later?
Yes. A wireless system can start with one system, such as curtains or the lights in one room, and grow room by room. In the UAE one system typically costs AED 5,000–8,000 before VAT.
Can I automate a rented apartment?
A wireless system changes switches and adds devices rather than cabling, which makes it the usual choice for a finished apartment. Agree any change to the switches with your landlord first.
Does it still work if the internet goes down?
It depends on the devices and the hub chosen, so ask for it when you get the quote and we will say which parts of your system keep working locally.
Is a wireless system less reliable than a wired one?
Both are reliable when installed properly; the difference is scope. A wired system runs every point from one panel and suits large new builds. A wireless system needs good Wi-Fi coverage and a hub in range of the devices, which is checked before installation.
What warranty do I get?
Hardware carries the manufacturer's warranty. Modo's installation workmanship is covered for 12 months from handover. An annual maintenance contract is quoted separately if you want one.
Want this answered for your own space? Talk to the team that does the work.